7.0 mm drill size
A 7.0 mm metric drill is 0.2756 in (7.000 mm). It is the cut tap, 75% thread drill for M8x1.
- Decimal inch
- 0.2756
- Millimeters
- 7.000
- Nearest 1/64
- 9/32" (-0.0057)
- Type
- metric drill
Nearest equivalents in other systems
Speeds and feeds: in mild steel an HSS drill starts at about 1,250 RPM and 0.0071 in/rev (8.88 IPM); in 6061 aluminum about 3,470 RPM.
7.0 mm drill speeds and feeds by material
Jobber-length twist drill, D = 0.2756 in. RPM = 3.82 × SFM ÷ D, rounded to 10. Feed per rev scales with diameter and material; IPM = RPM × IPR.
| Material | HSS SFM | HSS RPM | Carbide SFM | Carbide RPM | Feed (in/rev) | HSS IPM | Carbide IPM |
|---|---|---|---|---|---|---|---|
| Aluminum (6061) | 250 | 3,470 | 600 | 8,320 | 0.0065 | 22.6 | 54.1 |
| Brass / free-machining | 150 | 2,080 | 400 | 5,540 | 0.0055 | 11.4 | 30.5 |
| Low-carbon steel (1018) | 90 | 1,250 | 300 | 4,160 | 0.0071 | 8.88 | 29.5 |
| Alloy steel (4140, annealed) | 70 | 970 | 250 | 3,470 | 0.0073 | 7.08 | 25.3 |
| Stainless 304 | 40 | 550 | 150 | 2,080 | 0.0047 | 2.59 | 9.78 |
| Gray cast iron | 80 | 1,110 | 250 | 3,470 | 0.0049 | 5.44 | 17.0 |
| Titanium 6Al-4V | 25 | 350 | 100 | 1,390 | 0.0033 | 1.16 | 4.59 |
| Plastics (acetal) | 300 | 4,160 | 500 | 6,930 | 0.0042 | 17.5 | 29.1 |
Metric: Vc (m/min) = SFM × 0.3048; feed (mm/rev) = in/rev × 25.4. In steel, 1,250 RPM × 0.180 mm/rev = 225 mm/min.
Worked example: 7.0 mm drill in 1018 steel
- HSS drill in low-carbon steel: 90 SFM.
- RPM = 3.82 × 90 ÷ 0.2756 ≈ 1,250 RPM.
- Feed for a 0.276 in drill in mild steel ≈ 0.0071 in/rev.
- IPM = 1,250 × 0.0071 = 8.88 IPM.
Peck cycle by hole depth
| Depth | Cycle | Peck | Note |
|---|---|---|---|
| 3×D = 0.827 in (21 mm) | G81 (no peck) | None | Up to 3×D a sharp drill clears chips on its own. |
| 5×D = 1.378 in (35 mm) | G73 chip-break | 1 × D | Chip-break pecks; full retract if chips pack (soft aluminum, stainless). |
| 8×D = 2.205 in (56 mm) | G83 full retract | 0.5-1 × D, shrinking with depth | Retract to clear chips; reduce feed ~10-20% past 5×D. |
Taps that use a 7.0 mm drill
- M8x1 — cut tap, 75% thread
Nearest drills
- Letter J: 0.2770 in / 7.036 mm (+0.0014 in)
- Letter I: 0.2720 in / 6.909 mm (-0.0036 in)
- 6.9 mm: 0.2717 in / 6.900 mm (-0.0039 in)
- 7.1 mm: 0.2795 in / 7.100 mm (+0.0039 in)
Common questions
- What is a 7.0 mm drill in decimal and mm?
- 0.2756 in, or 7.000 mm; nearest fractional drill: 9/32" (0.2813 in, +0.0057 in); nearest number / letter drill: Letter J (0.2770 in, +0.0014 in).
- What RPM for a 7.0 mm drill in steel?
- In low-carbon steel (1018) an HSS 7.0 mm drill (0.2756 in) runs about 1,250 RPM at 90 SFM; a carbide drill about 4,160 RPM at 300 SFM. RPM = 3.82 × SFM ÷ D.
- What feed for a 7.0 mm drill?
- About 0.0071 in/rev in mild steel, 0.0065 in/rev in aluminum and 0.0047 in/rev in 304 stainless. At 1,250 RPM that is 8.88 IPM in steel (IPM = RPM × IPR).
- What RPM for a 7.0 mm drill in aluminum?
- 3,470 RPM with HSS (250 SFM) or up to 8,320 RPM with carbide (600 SFM), feeding about 0.0065 in/rev.
- What tap uses a 7.0 mm drill?
- M8x1 (cut tap, 75% thread).
Nearby drill sizes
Sources
- Machinery's Handbook, 31st ed., Speeds and Feeds for Drilling, Reaming and Threading (Tables 17-23) — HSS and carbide drilling SFM (rounded).
- RedLine Tools (Productivity Inc.) catalog p. 340, Cobalt & HSS Drills Speeds & Feeds — feed per rev by drill diameter and material (middle of the catalog range).
- ASME B94.11M twist drills: number (#1-#80) and letter (A-Z) drill sizes; drill size reference.
Material feed multipliers (aluminum 1.3×, brass 1.1×, 4140 0.85×, stainless and titanium 0.7× the mild-steel feed) are JobLine estimates. Peck guidance is JobLine shop practice. Use your drill maker's data first.
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profileBring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs