11.0 mm drill size
A 11.0 mm metric drill is 0.4331 in (11.000 mm). It is the cut tap, 50% thread drill for M12x1.5.
- Decimal inch
- 0.4331
- Millimeters
- 11.000
- Nearest 1/64
- 7/16" (-0.0044)
- Type
- metric drill
Nearest equivalents in other systems
Speeds and feeds: in mild steel an HSS drill starts at about 790 RPM and 0.0100 in/rev (7.90 IPM); in 6061 aluminum about 2,210 RPM.
11.0 mm drill speeds and feeds by material
Jobber-length twist drill, D = 0.4331 in. RPM = 3.82 × SFM ÷ D, rounded to 10. Feed per rev scales with diameter and material; IPM = RPM × IPR.
| Material | HSS SFM | HSS RPM | Carbide SFM | Carbide RPM | Feed (in/rev) | HSS IPM | Carbide IPM |
|---|---|---|---|---|---|---|---|
| Aluminum (6061) | 250 | 2,210 | 600 | 5,290 | 0.0092 | 20.3 | 48.7 |
| Brass / free-machining | 150 | 1,320 | 400 | 3,530 | 0.0072 | 9.50 | 25.4 |
| Low-carbon steel (1018) | 90 | 790 | 300 | 2,650 | 0.0100 | 7.90 | 26.5 |
| Alloy steel (4140, annealed) | 70 | 620 | 250 | 2,210 | 0.0110 | 6.82 | 24.3 |
| Stainless 304 | 40 | 350 | 150 | 1,320 | 0.0073 | 2.56 | 9.64 |
| Gray cast iron | 80 | 710 | 250 | 2,210 | 0.0074 | 5.25 | 16.4 |
| Titanium 6Al-4V | 25 | 220 | 100 | 880 | 0.0046 | 1.01 | 4.05 |
| Plastics (acetal) | 300 | 2,650 | 500 | 4,410 | 0.0055 | 14.6 | 24.3 |
Metric: Vc (m/min) = SFM × 0.3048; feed (mm/rev) = in/rev × 25.4. In steel, 790 RPM × 0.254 mm/rev = 201 mm/min.
Worked example: 11.0 mm drill in 1018 steel
- HSS drill in low-carbon steel: 90 SFM.
- RPM = 3.82 × 90 ÷ 0.4331 ≈ 790 RPM.
- Feed for a 0.433 in drill in mild steel ≈ 0.0100 in/rev.
- IPM = 790 × 0.0100 = 7.90 IPM.
Peck cycle by hole depth
| Depth | Cycle | Peck | Note |
|---|---|---|---|
| 3×D = 1.299 in (33 mm) | G81 (no peck) | None | Up to 3×D a sharp drill clears chips on its own. |
| 5×D = 2.165 in (55 mm) | G73 chip-break | 1 × D | Chip-break pecks; full retract if chips pack (soft aluminum, stainless). |
| 8×D = 3.465 in (88 mm) | G83 full retract | 0.5-1 × D, shrinking with depth | Retract to clear chips; reduce feed ~10-20% past 5×D. |
Taps that use a 11.0 mm drill
- M12x1.5 — cut tap, 50% thread
Nearest drills
- 10.9 mm: 0.4291 in / 10.900 mm (-0.0039 in)
- 11.1 mm: 0.4370 in / 11.100 mm (+0.0039 in)
- 7/16": 0.4375 in / 11.112 mm (+0.0044 in)
- 10.8 mm: 0.4252 in / 10.800 mm (-0.0079 in)
Common questions
- What is a 11.0 mm drill in decimal and mm?
- 0.4331 in, or 11.000 mm; nearest fractional drill: 7/16" (0.4375 in, +0.0044 in); nearest number / letter drill: Letter Z (0.4130 in, -0.0201 in).
- What RPM for a 11.0 mm drill in steel?
- In low-carbon steel (1018) an HSS 11.0 mm drill (0.4331 in) runs about 790 RPM at 90 SFM; a carbide drill about 2,650 RPM at 300 SFM. RPM = 3.82 × SFM ÷ D.
- What feed for a 11.0 mm drill?
- About 0.0100 in/rev in mild steel, 0.0092 in/rev in aluminum and 0.0073 in/rev in 304 stainless. At 790 RPM that is 7.90 IPM in steel (IPM = RPM × IPR).
- What RPM for a 11.0 mm drill in aluminum?
- 2,210 RPM with HSS (250 SFM) or up to 5,290 RPM with carbide (600 SFM), feeding about 0.0092 in/rev.
- What tap uses a 11.0 mm drill?
- M12x1.5 (cut tap, 50% thread).
Nearby drill sizes
Sources
- Machinery's Handbook, 31st ed., Speeds and Feeds for Drilling, Reaming and Threading (Tables 17-23) — HSS and carbide drilling SFM (rounded).
- RedLine Tools (Productivity Inc.) catalog p. 340, Cobalt & HSS Drills Speeds & Feeds — feed per rev by drill diameter and material (middle of the catalog range).
- ASME B94.11M twist drills: number (#1-#80) and letter (A-Z) drill sizes; drill size reference.
Material feed multipliers (aluminum 1.3×, brass 1.1×, 4140 0.85×, stainless and titanium 0.7× the mild-steel feed) are JobLine estimates. Peck guidance is JobLine shop practice. Use your drill maker's data first.
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profileBring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs