M2.5x0.45 tap drill size

    Use a 2.05 mm drill (2.05 mm) for a M2.5x0.45 cutting tap at 75% thread.

    Drills for M2.5x0.45 (Metric)
    Tap typeDrillDecimal (mm)
    Cutting tap, 75% thread2.05 mm2.05
    Cutting tap, 50% thread (hard material)2.2 mm2.20
    Roll / form tap, 65% thread2.3 mm2.30
    Pitch
    0.45 mm
    Major Ø
    2.50
    Pitch Ø
    2.21
    Minor Ø
    2.01
    Open the tap drill calculatorRoll tap chartHelicoil chart

    Common questions

    What size drill for a M2.5x0.45 tap?
    Use a 2.05 mm drill (2.05 mm) for a M2.5x0.45 cutting tap at 75% thread.
    What drill for a M2.5x0.45 roll (form) tap?
    About 2.30 mm; the nearest standard drill is 2.3 mm. Check your tap maker's table.

    Other Metric sizes

    Drill sizes from Machinery's Handbook and ASME B1.1/B1.13M; roll tap sizes from the form-tap formula. Tap and insert makers' tables are authoritative.

    Free for machinists & programmers

    Put your skills on a free talent profile

    Machines, controls, certs and saved calculations in one profile shops can find.

    Create free profile
    For your shop

    Bring shift handoffs to your shop

    Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.

    See shift handoffs