M14×2.0 tap drill size
Use a 12.0mm drill (12.00 mm) for a M14×2.0 cutting tap at 75% thread.
| Tap type | Drill | Decimal (mm) |
|---|---|---|
| Cutting tap, 75% thread | 12.0mm | 12.00 |
| Cutting tap, 50% thread (hard material) | 12.5mm | 12.50 |
| Roll / form tap, 65% thread | 13.10 mm | 13.10 |
| Helicoil / STI insert (M14×2.0×1D) | 15.0mm | 15.00 |
- Pitch
- 2 mm
- Major Ø
- 14.00
- Pitch Ø
- 12.70
- Minor Ø
- 11.84
Common questions
- What size drill for a M14×2.0 tap?
- Use a 12.0mm drill (12.00 mm) for a M14×2.0 cutting tap at 75% thread.
- What drill for a M14×2.0 roll (form) tap?
- About 13.12 mm; the nearest standard drill is 13.10 mm. Check your tap maker's table.
- What drill for a M14×2.0 Helicoil?
- Drill 15.0mm (15.00 mm), then tap with the M14×2.0 STI tap.
Other Metric sizes
Drill sizes from Machinery's Handbook and ASME B1.1/B1.13M; roll tap sizes from the form-tap formula. Tap and insert makers' tables are authoritative.