5.0 mm drill size
A 5.0 mm metric drill is 0.1968 in (5.000 mm). It is the cut tap, 75% thread drill for M6×1.0.
- Decimal inch
- 0.1968
- Millimeters
- 5.000
- Nearest 1/64
- 13/64" (-0.0063)
- Type
- metric drill
Nearest equivalents in other systems
Speeds and feeds: in mild steel an HSS drill starts at about 1,750 RPM and 0.0050 in/rev (8.75 IPM); in 6061 aluminum about 4,850 RPM.
5.0 mm drill speeds and feeds by material
Jobber-length twist drill, D = 0.1968 in. RPM = 3.82 × SFM ÷ D, rounded to 10. Feed per rev scales with diameter and material; IPM = RPM × IPR.
| Material | HSS SFM | HSS RPM | Carbide SFM | Carbide RPM | Feed (in/rev) | HSS IPM | Carbide IPM |
|---|---|---|---|---|---|---|---|
| Aluminum (6061) | 250 | 4,850 | 600 | 11,640 | 0.0047 | 22.8 | 54.7 |
| Brass / free-machining | 150 | 2,910 | 400 | 7,760 | 0.0040 | 11.6 | 31.0 |
| Low-carbon steel (1018) | 90 | 1,750 | 300 | 5,820 | 0.0050 | 8.75 | 29.1 |
| Alloy steel (4140, annealed) | 70 | 1,360 | 250 | 4,850 | 0.0050 | 6.80 | 24.3 |
| Stainless 304 | 40 | 780 | 150 | 2,910 | 0.0033 | 2.57 | 9.60 |
| Gray cast iron | 80 | 1,550 | 250 | 4,850 | 0.0034 | 5.27 | 16.5 |
| Titanium 6Al-4V | 25 | 490 | 100 | 1,940 | 0.0024 | 1.18 | 4.66 |
| Plastics (acetal) | 300 | 5,820 | 500 | 9,700 | 0.0044 | 25.6 | 42.7 |
Metric: Vc (m/min) = SFM × 0.3048; feed (mm/rev) = in/rev × 25.4. In steel, 1,750 RPM × 0.127 mm/rev = 222 mm/min.
Worked example: 5.0 mm drill in 1018 steel
- HSS drill in low-carbon steel: 90 SFM.
- RPM = 3.82 × 90 ÷ 0.1968 ≈ 1,750 RPM.
- Feed for a 0.197 in drill in mild steel ≈ 0.0050 in/rev.
- IPM = 1,750 × 0.0050 = 8.75 IPM.
Peck cycle by hole depth
| Depth | Cycle | Peck | Note |
|---|---|---|---|
| 3×D = 0.591 in (15 mm) | G81 (no peck) | None | Up to 3×D a sharp drill clears chips on its own. |
| 5×D = 0.984 in (25 mm) | G73 chip-break | 1 × D | Chip-break pecks; full retract if chips pack (soft aluminum, stainless). |
| 8×D = 1.575 in (40 mm) | G83 full retract | 0.5-1 × D, shrinking with depth | Retract to clear chips; reduce feed ~10-20% past 5×D. |
Taps that use a 5.0 mm drill
- M6×1.0 — cut tap, 75% thread · tap speeds and feeds
Nearest drills
- #9: 0.1960 in / 4.978 mm (-0.0008 in)
- #8: 0.1990 in / 5.055 mm (+0.0022 in)
- #10: 0.1935 in / 4.915 mm (-0.0034 in)
- 4.9 mm: 0.1929 in / 4.900 mm (-0.0039 in)
Common questions
- What is a 5.0 mm drill in decimal and mm?
- 0.1968 in, or 5.000 mm; nearest fractional drill: 13/64" (0.2031 in, +0.0063 in); nearest number / letter drill: #9 (0.1960 in, -0.0008 in).
- What RPM for a 5.0 mm drill in steel?
- In low-carbon steel (1018) an HSS 5.0 mm drill (0.1968 in) runs about 1,750 RPM at 90 SFM; a carbide drill about 5,820 RPM at 300 SFM. RPM = 3.82 × SFM ÷ D.
- What feed for a 5.0 mm drill?
- About 0.0050 in/rev in mild steel, 0.0047 in/rev in aluminum and 0.0033 in/rev in 304 stainless. At 1,750 RPM that is 8.75 IPM in steel (IPM = RPM × IPR).
- What RPM for a 5.0 mm drill in aluminum?
- 4,850 RPM with HSS (250 SFM) or up to 11,640 RPM with carbide (600 SFM), feeding about 0.0047 in/rev.
- What tap uses a 5.0 mm drill?
- M6×1.0 (cut tap, 75% thread).
Nearby drill sizes
Sources
- Machinery's Handbook, 31st ed., Speeds and Feeds for Drilling, Reaming and Threading (Tables 17-23) — HSS and carbide drilling SFM (rounded).
- RedLine Tools (Productivity Inc.) catalog p. 340, Cobalt & HSS Drills Speeds & Feeds — feed per rev by drill diameter and material (middle of the catalog range).
- ASME B94.11M twist drills: number (#1-#80) and letter (A-Z) drill sizes; drill size reference.
Material feed multipliers (aluminum 1.3×, brass 1.1×, 4140 0.85×, stainless and titanium 0.7× the mild-steel feed) are JobLine estimates. Peck guidance is JobLine shop practice. Use your drill maker's data first.
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profileBring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs