#11 drill size
A #11 number (wire-gauge) drill is 0.1910 in (4.851 mm).
- Decimal inch
- 0.1910
- Millimeters
- 4.851
- Nearest 1/64
- 3/16" (+0.0035)
- Type
- number (wire-gauge) drill
Nearest equivalents in other systems
| System | Drill | Inch | mm | Difference |
|---|---|---|---|---|
| Fractional | 3/16" | 0.1875 | 4.762 | -0.0035 in |
| Metric | 4.9 mm | 0.1929 | 4.900 | +0.0019 in |
Speeds and feeds: in mild steel an HSS drill starts at about 1,800 RPM and 0.0048 in/rev (8.64 IPM); in 6061 aluminum about 5,000 RPM.
#11 drill speeds and feeds by material
Jobber-length twist drill, D = 0.1910 in. RPM = 3.82 × SFM ÷ D, rounded to 10. Feed per rev scales with diameter and material; IPM = RPM × IPR.
| Material | HSS SFM | HSS RPM | Carbide SFM | Carbide RPM | Feed (in/rev) | HSS IPM | Carbide IPM |
|---|---|---|---|---|---|---|---|
| Aluminum (6061) | 250 | 5,000 | 600 | 12,000 | 0.0045 | 22.5 | 54.0 |
| Brass / free-machining | 150 | 3,000 | 400 | 8,000 | 0.0039 | 11.7 | 31.2 |
| Low-carbon steel (1018) | 90 | 1,800 | 300 | 6,000 | 0.0048 | 8.64 | 28.8 |
| Alloy steel (4140, annealed) | 70 | 1,400 | 250 | 5,000 | 0.0048 | 6.72 | 24.0 |
| Stainless 304 | 40 | 800 | 150 | 3,000 | 0.0032 | 2.56 | 9.60 |
| Gray cast iron | 80 | 1,600 | 250 | 5,000 | 0.0032 | 5.12 | 16.0 |
| Titanium 6Al-4V | 25 | 500 | 100 | 2,000 | 0.0023 | 1.15 | 4.60 |
| Plastics (acetal) | 300 | 6,000 | 500 | 10,000 | 0.0045 | 27.0 | 45.0 |
Metric: Vc (m/min) = SFM × 0.3048; feed (mm/rev) = in/rev × 25.4. In steel, 1,800 RPM × 0.122 mm/rev = 219 mm/min.
Worked example: #11 drill in 1018 steel
- HSS drill in low-carbon steel: 90 SFM.
- RPM = 3.82 × 90 ÷ 0.1910 ≈ 1,800 RPM.
- Feed for a 0.191 in drill in mild steel ≈ 0.0048 in/rev.
- IPM = 1,800 × 0.0048 = 8.64 IPM.
Peck cycle by hole depth
| Depth | Cycle | Peck | Note |
|---|---|---|---|
| 3×D = 0.573 in (14.6 mm) | G81 (no peck) | None | Up to 3×D a sharp drill clears chips on its own. |
| 5×D = 0.955 in (24.3 mm) | G73 chip-break | 1 × D | Chip-break pecks; full retract if chips pack (soft aluminum, stainless). |
| 8×D = 1.528 in (38.8 mm) | G83 full retract | 0.5-1 × D, shrinking with depth | Retract to clear chips; reduce feed ~10-20% past 5×D. |
Taps that use a #11 drill
No standard UNC, UNF or metric tap in our tables calls for a #11 drill. Use it for clearance, pilot or reamer prep holes.
Nearest drills
- 4.9 mm: 0.1929 in / 4.900 mm (+0.0019 in)
- #12: 0.1890 in / 4.801 mm (-0.0020 in)
- 4.8 mm: 0.1890 in / 4.800 mm (-0.0020 in)
- #10: 0.1935 in / 4.915 mm (+0.0025 in)
Common questions
- What is a #11 drill in decimal and mm?
- 0.1910 in, or 4.851 mm; nearest fractional drill: 3/16" (0.1875 in, -0.0035 in); nearest metric drill: 4.9 mm (0.1929 in, +0.0019 in).
- What RPM for a #11 drill in steel?
- In low-carbon steel (1018) an HSS #11 drill (0.1910 in) runs about 1,800 RPM at 90 SFM; a carbide drill about 6,000 RPM at 300 SFM. RPM = 3.82 × SFM ÷ D.
- What feed for a #11 drill?
- About 0.0048 in/rev in mild steel, 0.0045 in/rev in aluminum and 0.0032 in/rev in 304 stainless. At 1,800 RPM that is 8.64 IPM in steel (IPM = RPM × IPR).
- What RPM for a #11 drill in aluminum?
- 5,000 RPM with HSS (250 SFM) or up to 12,000 RPM with carbide (600 SFM), feeding about 0.0045 in/rev.
- What size is a #11 drill?
- 0.1910 in / 4.851 mm. The nearest other drills are 4.9 mm (0.1929 in), #12 (0.1890 in), 4.8 mm (0.1890 in).
Nearby drill sizes
Sources
- Machinery's Handbook, 31st ed., Speeds and Feeds for Drilling, Reaming and Threading (Tables 17-23) — HSS and carbide drilling SFM (rounded).
- RedLine Tools (Productivity Inc.) catalog p. 340, Cobalt & HSS Drills Speeds & Feeds — feed per rev by drill diameter and material (middle of the catalog range).
- ASME B94.11M twist drills: number (#1-#80) and letter (A-Z) drill sizes; drill size reference.
Material feed multipliers (aluminum 1.3×, brass 1.1×, 4140 0.85×, stainless and titanium 0.7× the mild-steel feed) are JobLine estimates. Peck guidance is JobLine shop practice. Use your drill maker's data first.
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profileBring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs