43/64" drill size
A 43/64" fractional drill is 0.6719 in (17.066 mm). It is the form (roll) tap, 65% thread drill for 11/16-24.
- Decimal inch
- 0.6719
- Millimeters
- 17.066
- Nearest 1/64
- 43/64" (+0.0000)
- Type
- fractional drill
Nearest equivalents in other systems
Speeds and feeds: in mild steel an HSS drill starts at about 510 RPM and 0.0112 in/rev (5.71 IPM); in 6061 aluminum about 1,420 RPM.
43/64" drill speeds and feeds by material
Jobber-length twist drill, D = 0.6719 in. RPM = 3.82 × SFM ÷ D, rounded to 10. Feed per rev scales with diameter and material; IPM = RPM × IPR.
| Material | HSS SFM | HSS RPM | Carbide SFM | Carbide RPM | Feed (in/rev) | HSS IPM | Carbide IPM |
|---|---|---|---|---|---|---|---|
| Aluminum (6061) | 250 | 1,420 | 600 | 3,410 | 0.0107 | 15.2 | 36.5 |
| Brass / free-machining | 150 | 850 | 400 | 2,270 | 0.0088 | 7.48 | 20.0 |
| Low-carbon steel (1018) | 90 | 510 | 300 | 1,710 | 0.0112 | 5.71 | 19.1 |
| Alloy steel (4140, annealed) | 70 | 400 | 250 | 1,420 | 0.0118 | 4.72 | 16.8 |
| Stainless 304 | 40 | 230 | 150 | 850 | 0.0092 | 2.12 | 7.82 |
| Gray cast iron | 80 | 450 | 250 | 1,420 | 0.0095 | 4.27 | 13.5 |
| Titanium 6Al-4V | 25 | 140 | 100 | 570 | 0.0053 | 0.74 | 3.02 |
| Plastics (acetal) | 300 | 1,710 | 500 | 2,840 | 0.0067 | 11.5 | 19.0 |
Metric: Vc (m/min) = SFM × 0.3048; feed (mm/rev) = in/rev × 25.4. In steel, 510 RPM × 0.284 mm/rev = 145 mm/min.
Worked example: 43/64" drill in 1018 steel
- HSS drill in low-carbon steel: 90 SFM.
- RPM = 3.82 × 90 ÷ 0.6719 ≈ 510 RPM.
- Feed for a 0.672 in drill in mild steel ≈ 0.0112 in/rev.
- IPM = 510 × 0.0112 = 5.71 IPM.
Peck cycle by hole depth
| Depth | Cycle | Peck | Note |
|---|---|---|---|
| 3×D = 2.016 in (51.2 mm) | G81 (no peck) | None | Up to 3×D a sharp drill clears chips on its own. |
| 5×D = 3.359 in (85.3 mm) | G73 chip-break | 1 × D | Chip-break pecks; full retract if chips pack (soft aluminum, stainless). |
| 8×D = 5.375 in (136.5 mm) | G83 full retract | 0.5-1 × D, shrinking with depth | Retract to clear chips; reduce feed ~10-20% past 5×D. |
Taps that use a 43/64" drill
- 11/16-24 — form (roll) tap, 65% thread
Nearest drills
- 17.0 mm: 0.6693 in / 17.000 mm (-0.0026 in)
- 17.25 mm: 0.6791 in / 17.250 mm (+0.0073 in)
- 16.75 mm: 0.6594 in / 16.750 mm (-0.0124 in)
- 21/32": 0.6563 in / 16.669 mm (-0.0156 in)
Common questions
- What is a 43/64" drill in decimal and mm?
- 0.6719 in, or 17.066 mm; nearest number / letter drill: Letter Z (0.4130 in, -0.2589 in); nearest metric drill: 17.0 mm (0.6693 in, -0.0026 in).
- What RPM for a 43/64" drill in steel?
- In low-carbon steel (1018) an HSS 43/64" drill (0.6719 in) runs about 510 RPM at 90 SFM; a carbide drill about 1,710 RPM at 300 SFM. RPM = 3.82 × SFM ÷ D.
- What feed for a 43/64" drill?
- About 0.0112 in/rev in mild steel, 0.0107 in/rev in aluminum and 0.0092 in/rev in 304 stainless. At 510 RPM that is 5.71 IPM in steel (IPM = RPM × IPR).
- What RPM for a 43/64" drill in aluminum?
- 1,420 RPM with HSS (250 SFM) or up to 3,410 RPM with carbide (600 SFM), feeding about 0.0107 in/rev.
- What tap uses a 43/64" drill?
- 11/16-24 (form (roll) tap, 65% thread).
Nearby drill sizes
Sources
- Machinery's Handbook, 31st ed., Speeds and Feeds for Drilling, Reaming and Threading (Tables 17-23) — HSS and carbide drilling SFM (rounded).
- RedLine Tools (Productivity Inc.) catalog p. 340, Cobalt & HSS Drills Speeds & Feeds — feed per rev by drill diameter and material (middle of the catalog range).
- ASME B94.11M twist drills: number (#1-#80) and letter (A-Z) drill sizes; drill size reference.
Material feed multipliers (aluminum 1.3×, brass 1.1×, 4140 0.85×, stainless and titanium 0.7× the mild-steel feed) are JobLine estimates. Peck guidance is JobLine shop practice. Use your drill maker's data first.
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profileBring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs