#62 drill size
A #62 number (wire-gauge) drill is 0.0380 in (0.965 mm).
- Decimal inch
- 0.0380
- Millimeters
- 0.965
- Nearest 1/64
- 1/32" (+0.0067)
- Type
- number (wire-gauge) drill
Nearest equivalents in other systems
| System | Drill | Inch | mm | Difference |
|---|---|---|---|---|
| Fractional | 1/32" | 0.0313 | 0.794 | -0.0067 in |
| Metric | 0.95 mm | 0.0374 | 0.950 | -0.0006 in |
Speeds and feeds: in mild steel an HSS drill starts at about 9,050 RPM and 0.0009 in/rev (8.15 IPM); in 6061 aluminum about 25,130 RPM.
#62 drill speeds and feeds by material
Jobber-length twist drill, D = 0.0380 in. RPM = 3.82 × SFM ÷ D, rounded to 10. Feed per rev scales with diameter and material; IPM = RPM × IPR.
| Material | HSS SFM | HSS RPM | Carbide SFM | Carbide RPM | Feed (in/rev) | HSS IPM | Carbide IPM |
|---|---|---|---|---|---|---|---|
| Aluminum (6061) | 250 | 25,130 | 600 | 60,310 | 0.0009 | 22.6 | 54.3 |
| Brass / free-machining | 150 | 15,080 | 400 | 40,210 | 0.0007 | 10.6 | 28.1 |
| Low-carbon steel (1018) | 90 | 9,050 | 300 | 30,160 | 0.0009 | 8.15 | 27.1 |
| Alloy steel (4140, annealed) | 70 | 7,040 | 250 | 25,130 | 0.0009 | 6.34 | 22.6 |
| Stainless 304 | 40 | 4,020 | 150 | 15,080 | 0.0006 | 2.41 | 9.05 |
| Gray cast iron | 80 | 8,040 | 250 | 25,130 | 0.0005 | 4.02 | 12.6 |
| Titanium 6Al-4V | 25 | 2,510 | 100 | 10,050 | 0.0005 | 1.26 | 5.03 |
| Plastics (acetal) | 300 | 30,160 | 500 | 50,260 | 0.0015 | 45.2 | 75.4 |
Small drills: the computed RPM is above most spindles. Run at your spindle's maximum and keep the feed per rev; feed drops in proportion.
Metric: Vc (m/min) = SFM × 0.3048; feed (mm/rev) = in/rev × 25.4. In steel, 9,050 RPM × 0.023 mm/rev = 207 mm/min.
Worked example: #62 drill in 1018 steel
- HSS drill in low-carbon steel: 90 SFM.
- RPM = 3.82 × 90 ÷ 0.0380 ≈ 9,050 RPM.
- Feed for a 0.038 in drill in mild steel ≈ 0.0009 in/rev.
- IPM = 9,050 × 0.0009 = 8.15 IPM.
Peck cycle by hole depth
| Depth | Cycle | Peck | Note |
|---|---|---|---|
| 3×D = 0.114 in (2.9 mm) | G81 (no peck) | None | Up to 3×D a sharp drill clears chips on its own. |
| 5×D = 0.190 in (4.8 mm) | G73 chip-break | 1 × D | Chip-break pecks; full retract if chips pack (soft aluminum, stainless). |
| 8×D = 0.304 in (7.7 mm) | G83 full retract | 0.5-1 × D, shrinking with depth | Retract to clear chips; reduce feed ~10-20% past 5×D. |
Taps that use a #62 drill
No standard UNC, UNF or metric tap in our tables calls for a #62 drill. Use it for clearance, pilot or reamer prep holes.
Nearest drills
- 0.95 mm: 0.0374 in / 0.950 mm (-0.0006 in)
- #63: 0.0370 in / 0.940 mm (-0.0010 in)
- #61: 0.0390 in / 0.991 mm (+0.0010 in)
- 1.0 mm: 0.0394 in / 1.000 mm (+0.0014 in)
Common questions
- What is a #62 drill in decimal and mm?
- 0.0380 in, or 0.965 mm; nearest fractional drill: 1/32" (0.0313 in, -0.0067 in); nearest metric drill: 0.95 mm (0.0374 in, -0.0006 in).
- What RPM for a #62 drill in steel?
- In low-carbon steel (1018) an HSS #62 drill (0.0380 in) runs about 9,050 RPM at 90 SFM; a carbide drill about 30,160 RPM at 300 SFM. RPM = 3.82 × SFM ÷ D.
- What feed for a #62 drill?
- About 0.0009 in/rev in mild steel, 0.0009 in/rev in aluminum and 0.0006 in/rev in 304 stainless. At 9,050 RPM that is 8.15 IPM in steel (IPM = RPM × IPR).
- What RPM for a #62 drill in aluminum?
- 25,130 RPM with HSS (250 SFM) or up to 60,310 RPM with carbide (600 SFM), feeding about 0.0009 in/rev.
- What size is a #62 drill?
- 0.0380 in / 0.965 mm. The nearest other drills are 0.95 mm (0.0374 in), #63 (0.0370 in), #61 (0.0390 in).
Nearby drill sizes
Sources
- Machinery's Handbook, 31st ed., Speeds and Feeds for Drilling, Reaming and Threading (Tables 17-23) — HSS and carbide drilling SFM (rounded).
- RedLine Tools (Productivity Inc.) catalog p. 340, Cobalt & HSS Drills Speeds & Feeds — feed per rev by drill diameter and material (middle of the catalog range).
- ASME B94.11M twist drills: number (#1-#80) and letter (A-Z) drill sizes; drill size reference.
Material feed multipliers (aluminum 1.3×, brass 1.1×, 4140 0.85×, stainless and titanium 0.7× the mild-steel feed) are JobLine estimates. Peck guidance is JobLine shop practice. Use your drill maker's data first.
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profileBring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs