13.0 mm drill size
A 13.0 mm metric drill is 0.5118 in (13.000 mm). It is the cut tap, 50% thread drill for M14x1.5.
- Decimal inch
- 0.5118
- Millimeters
- 13.000
- Nearest 1/64
- 33/64" (-0.0038)
- Type
- metric drill
Nearest equivalents in other systems
Speeds and feeds: in mild steel an HSS drill starts at about 670 RPM and 0.0105 in/rev (7.04 IPM); in 6061 aluminum about 1,870 RPM.
13.0 mm drill speeds and feeds by material
Jobber-length twist drill, D = 0.5118 in. RPM = 3.82 × SFM ÷ D, rounded to 10. Feed per rev scales with diameter and material; IPM = RPM × IPR.
| Material | HSS SFM | HSS RPM | Carbide SFM | Carbide RPM | Feed (in/rev) | HSS IPM | Carbide IPM |
|---|---|---|---|---|---|---|---|
| Aluminum (6061) | 250 | 1,870 | 600 | 4,480 | 0.0100 | 18.7 | 44.8 |
| Brass / free-machining | 150 | 1,120 | 400 | 2,990 | 0.0083 | 9.30 | 24.8 |
| Low-carbon steel (1018) | 90 | 670 | 300 | 2,240 | 0.0105 | 7.04 | 23.5 |
| Alloy steel (4140, annealed) | 70 | 520 | 250 | 1,870 | 0.0115 | 5.98 | 21.5 |
| Stainless 304 | 40 | 300 | 150 | 1,120 | 0.0085 | 2.55 | 9.52 |
| Gray cast iron | 80 | 600 | 250 | 1,870 | 0.0086 | 5.16 | 16.1 |
| Titanium 6Al-4V | 25 | 190 | 100 | 750 | 0.0050 | 0.95 | 3.75 |
| Plastics (acetal) | 300 | 2,240 | 500 | 3,730 | 0.0060 | 13.4 | 22.4 |
Metric: Vc (m/min) = SFM × 0.3048; feed (mm/rev) = in/rev × 25.4. In steel, 670 RPM × 0.267 mm/rev = 179 mm/min.
Worked example: 13.0 mm drill in 1018 steel
- HSS drill in low-carbon steel: 90 SFM.
- RPM = 3.82 × 90 ÷ 0.5118 ≈ 670 RPM.
- Feed for a 0.512 in drill in mild steel ≈ 0.0105 in/rev.
- IPM = 670 × 0.0105 = 7.04 IPM.
Peck cycle by hole depth
| Depth | Cycle | Peck | Note |
|---|---|---|---|
| 3×D = 1.535 in (39 mm) | G81 (no peck) | None | Up to 3×D a sharp drill clears chips on its own. |
| 5×D = 2.559 in (65 mm) | G73 chip-break | 1 × D | Chip-break pecks; full retract if chips pack (soft aluminum, stainless). |
| 8×D = 4.094 in (104 mm) | G83 full retract | 0.5-1 × D, shrinking with depth | Retract to clear chips; reduce feed ~10-20% past 5×D. |
Taps that use a 13.0 mm drill
- M14x1.5 — cut tap, 50% thread
Nearest drills
- 33/64": 0.5156 in / 13.097 mm (+0.0038 in)
- 12.9 mm: 0.5079 in / 12.900 mm (-0.0039 in)
- 13.1 mm: 0.5158 in / 13.100 mm (+0.0039 in)
- 12.8 mm: 0.5039 in / 12.800 mm (-0.0079 in)
Common questions
- What is a 13.0 mm drill in decimal and mm?
- 0.5118 in, or 13.000 mm; nearest fractional drill: 33/64" (0.5156 in, +0.0038 in); nearest number / letter drill: Letter Z (0.4130 in, -0.0988 in).
- What RPM for a 13.0 mm drill in steel?
- In low-carbon steel (1018) an HSS 13.0 mm drill (0.5118 in) runs about 670 RPM at 90 SFM; a carbide drill about 2,240 RPM at 300 SFM. RPM = 3.82 × SFM ÷ D.
- What feed for a 13.0 mm drill?
- About 0.0105 in/rev in mild steel, 0.0100 in/rev in aluminum and 0.0085 in/rev in 304 stainless. At 670 RPM that is 7.04 IPM in steel (IPM = RPM × IPR).
- What RPM for a 13.0 mm drill in aluminum?
- 1,870 RPM with HSS (250 SFM) or up to 4,480 RPM with carbide (600 SFM), feeding about 0.0100 in/rev.
- What tap uses a 13.0 mm drill?
- M14x1.5 (cut tap, 50% thread).
Nearby drill sizes
Sources
- Machinery's Handbook, 31st ed., Speeds and Feeds for Drilling, Reaming and Threading (Tables 17-23) — HSS and carbide drilling SFM (rounded).
- RedLine Tools (Productivity Inc.) catalog p. 340, Cobalt & HSS Drills Speeds & Feeds — feed per rev by drill diameter and material (middle of the catalog range).
- ASME B94.11M twist drills: number (#1-#80) and letter (A-Z) drill sizes; drill size reference.
Material feed multipliers (aluminum 1.3×, brass 1.1×, 4140 0.85×, stainless and titanium 0.7× the mild-steel feed) are JobLine estimates. Peck guidance is JobLine shop practice. Use your drill maker's data first.
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profileBring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs