1-9/16-18 tap drill size
Use a 1-33/64 drill (1.5156 in) for a 1-9/16-18 cutting tap at 75% thread.
| Tap type | Drill | Decimal (in) |
|---|---|---|
| Cutting tap, 75% thread | 1-33/64 | 1.5156 |
| Cutting tap, 50% thread (hard material) | 1-17/32 | 1.5313 |
| Roll / form tap, 65% thread | 1-17/32 | 1.5313 |
- Pitch
- 1.4111 mm (18 TPI)
- Major Ø
- 1.5625
- Pitch Ø
- 1.5264
- Minor Ø
- 1.5024
Common questions
- What size drill for a 1-9/16-18 tap?
- Use a 1-33/64 drill (1.5156 in) for a 1-9/16-18 cutting tap at 75% thread.
- What drill for a 1-9/16-18 roll (form) tap?
- About 1.5379 in; the nearest standard drill is 1-17/32. Check your tap maker's table.
Other UNEF sizes
Drill sizes from Machinery's Handbook and ASME B1.1/B1.13M; roll tap sizes from the form-tap formula. Tap and insert makers' tables are authoritative.
Free for machinists & programmers
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profile For your shop
Bring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs